Accumulator Spheres, Valves & Switches

This is the warning plate that is attached to both of the brake accumulator spheres.  PART NUMBER: UE10381 MODEL / CHASSIS APPLICABILITY   1966-1980 Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II ...

This washer has a number of applications:1. It is the washer on the choke stove pipe adapters UA5802Z and UE32833 on all cars from 1955 to 1977.2. It is the sealing washer between the Shadow/ T Type brake pressure switches and valve bodies - 2 washers...

These are the bushes that the operating shaft (UR16887) runs on. They sit just behind the outer shaft o rings (UR10832). Note: 2 Bushes per height control / 4 per car (Sold Each) Part Number:  UR17828 Model / Chassis...

This is the high pressure pipe between the rear brake pump and the rear accumulator. It is suitable for all cars from approx 1973 with the later big bore pipework. PART NUMBER: UR17518 MODEL / CHASSIS...

This is the plunger for the pressure switch. Each car needs 1 per Brake Pressure Switch2 required per carUD17876 PlungerUD18721 DiaphragmXB1078R Washer PART NUMBER: UD17876 MODEL / CHASSIS APPLICABILITY   1966-1980 ...

This is the high pressure steel braided hose from the front brake accumulator to the body of the car. It is only fitted to Shadow II and T2 models (after VIN 30000) where the front accumulator is mounted on the right side of the engine. Part...

This is the high pressure pipe from the front brake pump to the accumulator on the left hand side of the engine.  It is suitable for all cars from approx 1973 fitted with the bigger bore pipework and a right hand exhaust manifold with the take-off...

This is the rubber diaphragm inside the brake pressure switch. When rebuilding the brake pressure switch, you will need to add on part# UD17876 & XB1078R. PART NUMBER: UD18721 MODEL / CHASSIS...

This is a clamping washer for the accumulator plate. PART NUMBER: UE10380 MODEL / CHASSIS APPLICABILITY   1966-1980 (VIN 1001 to 41686)   

This is the boot that goes onto the brake pressure switch. Part Number:  UD14079 Model / Chassis Applicability   1966-1980 Silver Shadow I,II,III, T-series, Silver Wraith II  

This is the brake light switch for all models from 1945 to the mid 1970's.  This is a good used switch.  Will have a $50 core charge as this will be sold on an exchange basis.  Exchange means you will send in yours in "rebuild-able"...

This is the washer for the brake hose unions. This washer is also used for the height control leveling valves. PART NUMBER: UR1200 MODEL / CHASSIS APPLICABILITY   1955-1965 Silver Cloud, S-series, Continental &...

This is the seal kit to reseal one of the brake accumulator valve bodies  PART NUMBER: RH2435 MODEL / CHASSIS APPLICABILITY   1966-1980  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II  

Brake Accumulator Sphere This is a recently developed accumulator sphere, that is suitable for both the Series I and Series II models. Genuine accumulator spheres are no longer available from the factory.  With existing genuine units being...

This is the o ring between the brake accumulator sphere and the valve body. It is supplied as part of RH2435 and is also supplied with our reconditioned spheres and valve bodies. Part Number:  UE35100 Model / Chassis...