From VIN 7325 to 26700

This is the main spring inside the carburetor suction chamber.  PART NUMBER: CD5871 MODEL / CHASSIS APPLICABILITY   1966-1980  Silver Shadow, T-series, Shadow II, T-2, Silver Wraith II 1980-1998  Silver...

This is the spring for the main carburetors needle. Part Number: CD5453  Model / Chassis Applicability   From 1969 (vin# 8742) to 1986 (Vin# 17000)  

This is a Shadow II carburetor gasket RH13183 together with a new fixing bolt SPC1867, two dowels SPC1862 and aluminum washer WHT002850.It has been designed for all pre-Silver Shadow II models with a V8 engine. We have become aware that, after...

This is the o ring for the float chamber lid on all later Shadow and T Series 1 models - from VIN 8742 to 26708. It seals the charcoal filter into the float chamber lid. Note:  1 required per float chamber (Sold Each) PART...

This is the gland seal on the throttle spindle.  Note: 2 Seals per Spindle = 4 per car (Sold Each) Part Number:  CD5443 Model / Chassis Applicability     1969-1980  From (Vin 8742 onwards) 1981 to 1986...

This is the float chamber needle and seat kit for all cars with SU carburetors from 1966 to 1984. Note: 2 kits are required per car.  Sold Each Part Number: X-FNSK  / CD6007 Model / Chassis...

This is a carburetor damper assembly.  This is the damper for the main carburetor springpot. Part Number:  CD2190 Model / Chassis Applicability   1966-1976  (From VIN 1001 to 26700)  

This is a USED main bimetal choke spring.  Also known as the coil thermostat. This photo is for reference only and the part you receive might be slightly different. Please check with our sales staff if you have any questions Part...

This is the gasket between the carburetor and the intake manifold Part Number: UE6175 Model / Chassis Applicability   1959-1965 Silver Cloud II, III & Bentley S-2,3, Phantom V, Continental's 1965-1980 Shadow, Shadow,...

This is the carburetor kit needed when servicing the carburetor (2 kits required) per car.  You will also need the Main Carburetor Needle (UE36062) & the Diaphragm Spring (UE8408)  PART NUMBER: X-CK1 MODEL / CHASSIS...

This is the main carburetor jet needle BAE.  Part Number:  UE36062 Model / Chassis Applicability   1970-1980  (8741 to 22116) Not Corniche and Not USA 14954 onwards)      

This is the gasket between the 2" carburetors and the inlet manifold. Note: 2 Per Car (Sold Each)  PART NUMBER: RH13024  was UE2628 MODEL / CHASSIS APPLICABILITY   1955-1965 Silver Cloud, S-series,...

Carburetor Float measures (1.5") includes Gasket  This is the float chamber float for all cars from 1963 to 1977. It is 1.5" in diameter because RR started to fit a smaller diameter float to the Series 3 Silver Cloud and Bentley S Types to...

This is the Air Intake to Carburetor Gasket **4 required per car (Sold Each)  PART NUMBER: UE6230 MODEL / CHASSIS APPLICABILITY    RR Silver Cloud III, Phantom V & Bentley S-3 RR Silver Shadow & Bentley...

This is an ethanol resistant Carburetor Float measures (1.5") includes Gasket   If you want the brass style as original see CD3247 This is the float chamber float for all cars from 1963 to 1977. It is 1.5" in diameter because RR started...